Roll-Control2
Module for controlling rolling shutters, sun
awnings, Venetian blinds and rolling doors.
The Roll-Control2 module controls
alternating current tubular motors, such
as electric rolling shutters, sun awnings,
Venetian blinds and rolling doors.
The module lets you control the exact position
of the motors and, in the case of Venetian
blinds, the movement of the slats.
The device can measure energy consumption
and active current power.
With Roll-Control2, you can control the
connected devices either through the Z-Wave
network or via a switch or button connected
directly to it.
Main features:
• Compatible with Z-Wave and Z-Wave Plus
control systems. Works as a repeater.
• It supports Z-Wave network security modes:
S0 with AES-128 and S2 encryption.
• Authentication with PRNG encryption.
• It can be installed with tubular motors with
electronic or mechanical limit switches.
• Energy consumption measurement function.
• It works with various types of button: up-anddown, fixed-position, momentary position
toggle or rolling shutter-specific.
• Works with various types of switches and is
optimised for rolling shutter up/down buttons.
• It can be installed in wall-mounted switch
boxes.
• Wago quick connector and additional
terminals available for even faster installation.
• Setup wizard also from a smartphone.
TECHNICAL SPECIFICATIONS
Code Description Pcs./pack Certificates
ROLL-CONTROL2 Tubular motor control module 1
Code ROLL-CONTROL2
Input power 100-240V~50/60Hz
Rated load current 2 A
Type of load supported single-phase AC
Operating temperature (°C Min/Max) 0 - 35
For installation in wall-mounted boxes (mm) Ø >= 50, depth >= 60
Radio protocol Z-Wave (800 series)
Radio frequency (MHz) 868.4 or 869.85 (EU) 921.4 or 919.8 (ANZ)
Radio range (m) up to 100 m outdoors, up to 30 m indoors (depending on building structure)
Compliant with European directives RoHS 2011/65/EU - RED 2014/53/EU
Dimensions (mm) 46 x 36 x 19.9 h